Gemini PM-100 User Manual download pdf (Page 2)

Page 2

Introduction

Congratulations on purchasing the Gemini PM-100 speaker system. This

state of the art active 2-way speaker system includes the latest features

backed by a 3 year warranty. Prior to use, we suggest that you carefully read

all of the instructions.

Features

• ABS plastic construction

• Separate bass, treble and volume controls

• Surround enhancement (3D Function)

• All necessary cables

Cautions

1. Read all operating instructions before using this equipment. Keep this

manual in a safe place for future reference.

2. The apparatus should not be exposed to dripping or splashing and no

objects filled with liquids such as vases should be placed on the

apparatus.

3. To reduce the risk of electrical shock, do not open the unit. There are NO

USER REPLACEABLE PARTS INSIDE. Please contact the Gemini

Service Department or your authorized dealer to speak to a qualified

service technician.

4. Be sure that all AC power is OFF while making connections.

5. Do not expose this unit to direct sunlight or to a heat source such as a

radiator or stove.

6. This unit should be cleaned only with a damp cloth. Avoid solvents or

other cleaning detergents.

7. When moving this equipment, it should be placed in its original carton and

packaging. This will reduce the risk of damage during transit.

8. DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. Operators of

electronic equipment should in no way be in contact with water.

9. DO NOT USE ANY SPRAY CLEANER OR LUBRICANT ON ANY

CONTROLS OR SWITCHES.

10. If any objects or liquid fall into the unit, turn off the power and unplug the

unit immediately and have the system checked by a qualified service

technician before using it again.

Connections

1. Make sure that the power switch located on the front of the right speaker

is in the OFF position. This unit comes supplied with a DC power adaptor.

Plug the adaptor into the power jack (located on the bottom rear of the

right speaker). Then plug the adaptor into a proper power source.

2. Plug the cord coming from the left speaker into the connector marked L-

SPK on the right speaker.

3. Plug one end of the RCA cables into the output jacks on your mixer. Plug

the other end of the RCA cables into the jacks on the back of the right

speaker marked INPUT. When you are connecting the RCA cables, make

sure to match the color on the cable to the color on the speaker connector

(white = left channel, red = right channel).

4. Use the jack on the back of the right speaker marked OUTPUT to connect

to a subwoofer (optional).

Operation

1. Turn all of the controls (bass, treble and volume) located on the front of

the right speaker all the way to the left (the lowest level).

2. Press the power switch located on the front of the right speaker to the ON

position (the LED will light).

3. Adjust the bass, treble and volume controls to the desired levels.

4. For an enhanced effect, press the 3D button (located on the front of the

right speaker) to the ON position to add a 3 dimensional spacial effect to

your program.

Specifications

Output Power........................................................................25W + 25W WMRS

PMPO.........................................................................................................300W

Speaker Unit.....................................1.5” treble, 4” bass (magnetically shielded)

Impedance................................................................................................4 Ohm

Frequency Response..................................................................60 Hz - 18 kHz

Input Connectors...............................................................................RCA jacks

Output Connector....................................................3.5 mm stereo phone jack

Treble Up.....................................................................................10 dB ± 2 dB

Bass Up.......................................................................................10 dB ± 2 dB

Separation.................................................................................................48 dB

S/N Ratio..................................................................................................75 dB

Dimensions............................................7” x 5” x 10” (180 x 124 x 251 mm)

Weight.......................................................................................5.5 lbs (2.5 kg)

PM-100

Speaker System

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments

Gemini PM-100 User Manual Page 2

Comments to this Manuals