Gemini PMX-05 User Manual download pdf (Page 4)

(44)

Congratulations on your purchase of a GEMINI PMX-05 10" 2

Channel Stereo Mixer. This state-of-the-art mixer features the

latest technological advances and is backed by a 3 year warran-

ty, excluding the crossfader. The crossfader is backed by a sep-

arate 90 day warranty. Prior to use we suggest that you careful-

ly read all the instructions.

- 10" 2 stereo channel EFX mixer

- 4 line, 2 convertible phono/line, RCA inputs

- Dual ground screws for easy connectivity

- Master and record RCA outputs

FACE:

- 3 band rotary EQ control with cut feature

- Bright blue LCD display

- DSP module with 26 effects & a wide range of parameters

- Dry/Wet fader control

- Rotary control EFX selector

- Rotary parameter control

- Large backlit soft touch on/off button

- Removable face plate for user replaceable Rail Glide cross fader

- Ergonomically designed to be flush with turntable

- Smooth curved face plate

- Rotary gain channel control

- Dual VU display with bright LED

- 2 band rotary Mic EQ & volume controls

FRONT:

- Hamster/reverse & cross fader curve control switches

- Rotary cue volume control & cue section fader allowing cue mix

- 1/4" Mic input & headphone output

1. All instructions should be read before using this equipment.

2. To reduce the risk of electrical shock, do not open the unit.

Please refer all servicing needs to a GEMINI-qualified service

technician.

3. Do not expose this unit to direct sunlight or a heat source such

as a radiator or stove.

4. This unit should be cleaned only with a damp cloth. Avoid sol-

vents or other cleaning detergents.

5. When moving this equipment it should be placed in its origi-

nal carton and packaging. This will reduce the risk of damage

during transit.

6. DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

7. DO NOT USE SPRAY CLEANERS OR LUBRICANTS ON

CONTROLS, SURFACES OR SWITCHES.

1. Before plugging this unit into any outlet, make sure that the

VOLTAGE SELECTION SWITCH (1) is set to the proper volt-

age. To change the selection, unscrew the hard plastic protec-

tive top with a Phillips head screw driver. Then use a flat head

screw driver to move the switch to the proper selection

(115V/230V). Replace the hard plastic protective top, and screw

into the unit.

2. Ensure that the POWER SWITCH (3) is in the OFF position

prior to making any connections. Plug into the rear panel

POWER JACK (2) before plugging it into a proper power

source.

NOTE: LOCATED BY THE POWER CORD JACK (2) IS A 250V FUSE (41) TO

PROTECT AGAINST ELECTRICAL SURGES. TO REPLACE THE FUSE,

PLACE A FLAT HEAD SCREWDRIVER INTO THE GROOVE LOCATED INSIDE

THE POWER CORD JACK (2) AND POP THE FUSE OUT. REPLACE THE FUSE

WITH ONLY A 250V FUSE.

3. The PMX-05 has 2 sets of outputs:

- The MASTER OUTPUT (4) jacks also connect to the main

amplifier with RCA cables.

- The REC OUTPUT (42) jacks can be used to connect the

mixer to the record input of your recording unit, thus enabling

you to record your mix by connecting these units with RCA

cables.

4. Headphones may be plugged into the front panel-mounted

HEADPHONES (16) ¼" jack.

5. Microphones may be plugged into the front panel-mounted

MICROPHONE (12) ¼" jack.

6. The PMX-05 has 2 CONVERTIBLE PHONO/LINE (7, 8) RCA

inputs located on the rear panel on either side of the MASTER

RCA (4) input. Facing the rear panel, the convertible RCA Input

on your right is for PHONO 1/ LINE 1 (8). The convertible RCA

input on your left is for PHONO 2/ LINE 3 (7). Using the

PHONO/ LINE CONVERTER (5, 6) SWITCHES, located just

below each input, you may convert the PHONO (PH) to LINE

(LN) and vice versa. Plug the RCA's from your playable medium

into each input to be connected to their respective channels

(CH). The PH INPUTS only accept turntables with a magnetic

cartridge. The STEREO LINE INPUTS only accept line level

inputs such as a CD, DAT, MiniDisc, etc and require the LINE

setting using the PH/LN CONVERTER (5, 6) switches.

7. When using (a) turntable(s), you will need to ground the RCA

cable(s) by screwing in the grounding fork(s) to the GROUND-

ING SCREWS (9) located in the rear panel of the PMX-05 mixer.

Attach each PH ground line to one of the DUAL GROUND

THUMB SCREWS (9). These are adjacent to each RCA PH

input.

NOTE: WHEN USING TURNTABLES, NOT ATTACHING A GROUND MAY

CAUSE A SYSTEM "HUM."

1. POWER ON: Once all equipment connections have been

made, press POWER SWITCH (3). Power is ON when the VU

METER LED (40) is illuminated.

2. CH 1: The GAIN (22), HIGH (23), MID (24), and LOW (25)

controls allow you to fully adjust the selected source. The PH-

1/LN-1 CONVERTER (6) switch located on the rear panel

allows you to select PH 1 or LN 1. The LN SWITCH (21) locat-

ed on the front allows you to switch from PH 1 to LN 2 or LN 1

to LN 2. CH 1 FADER (26) controls the input level of this chan-

nel.

3. CH 2: The GAIN (28), HIGH (29), MID (30), and LOW (31)

controls allow you to fully adjust the selected source. The PH-

2/LN-3 CONVERTER (5) located on the rear panel allows you to

select PH 2 or LN 3. The LN SWITCH (27) located on the front

allows you to switch from PH 2 to LN 4 or LN 3 to LN 4. CH 2

FADER (32) controls the input level of this channel.

NOTE: FOR OPTIMAL PERFORMANCE, BEGIN PROGRAM MIX WITH

ROTARY GAIN (22, 28) CONTROLS SET TO ZERO (ROTATE IT COUNTER-

CLOCKWISE TO THE LEFT POSITION). MAKE ALL ADJUSTMENTS IN

SOUND OUTPUT WITH THE USE OF YOUR CH FADER CONTROLS (26, 32)

AND MASTER (39) VOLUME ROTARY CONTROLS. THIS WILL PREVENT SIG-

NAL OVERLOAD AND DECREASE DISTORTION. ONCE YOU HAVE MODI-

FIED YOUR SOUND AND WOULD LIKE TO INCREASE THE OUTPUT OF

YOUR SOUND, THEN YOU MAY ADJUST THE ROTARY GAIN CONTROL IF

NEEDED.

4. CROSSFADER SECTION: The CROSSFADER (33) allows

the mixing of one source into another. The left side of the

CROSSFADER (33) is CH 1 (26) while the right belongs to CH

2 (32). You may also reverse this default by flipping the

REVERSE (20) switch. See the CROSSFADER REVERSE sec-

tion for more info. The CROSSFADER (33) in your unit is remov-

able and if the need arises can be easily replaced. Your GEMINI

mixer comes with an RG-45 (RAILGLIDE™) DUAL-RAIL

CROSSFADER. RAIL GLIDE™ CROSSFADERS have internal

dual stainless steel rails that allow the slider to ride smoothly and

accurately from end to end. Also available is our is the RG-45

PRO (RAIL GLIDE™) CROSSFADER with a special curve

INTRODUCTION:

FEATURES:

PRECAUTIONS:

IN THE USA ~ IF YOU EXPERIENCE PROBLEMS WITH THIS UNIT

CALL GEMINI CUSTOMER SERVICE AT: 1 (732) 738-9003. DO NOT

ATTEMPT TO RETURN THIS EQUIPMENT TO YOUR DEALER.

CONNECTIONS:

OPERATING INSTRUCTIONS:

1 2 3 4 5 6 7 8 9 ... 19 20

Comments to this Manuals

No comments

Gemini PMX-05 User Manual Page 4

Comments to this Manuals

Related products and manuals for Audio Gemini PMX-05