Gemini IPMX User Manual download pdf (Page 5)

center position the kill function is not active, and the fre-

quency will not be killed. When you move the selected

KILL SWITCH to the bottom FLASH position and hold it

there, the frequency will be killed. Releasing the selected

KILL SWITCH from the bottom position will bring it back

to the center position and the frequency will no longer be

killed.

5. CROSSFADER SECTION: The CROSSFADER (21)

allows the mixing of one source into another. The left side

of the CROSSFADER (21) is CHANNEL 1 and the right

side is CHANNEL 2. The CROSSFADER (21) in your

unit is removable and if the need arises can be easily

replaced. Your Gemini mixer comes with an RG-45 PRO

(RAILGLIDE™) Dual-Rail Crossfader. Rail Glide™ cross-

faders have internal dual stainless steel rails that allow the

slider to ride smoothly and accurately from end to end.

Also available is our CF-45 PRO (PROGLIDE™) Dual-

Rail Crossfader. This unique crossfader features, state of

the art conductive plastic technology, for unlimited useage.

Another crossfader we have available is the PSF-45 (PRO

SCRATCH™) crossfader with a special curve designed for

scratch mixing. Just purchase one from your Gemini

dealer and follow the instructions:

Note: Do not apply pressure while using the Crossfader. Lightly

glide the Crossfader back and forth. Pressing down on the controls

can bend contacts and cause a loss of sound.

6. CURVE CONTROL: The CROSSFADER CURVE

SWITCH (12) allows you to adjust the kind of curve the

crossfader has. Depress the crossfader curve button to

make the curve steep and cutting (perfect for scratching).

Release the crossfader curve button to make the curve

gradual and gentle.

7. HAMSTER CONTROL: The CROSSFADER

REVERSE SWITCH (11) allows you to reverse the cross-

fader so that CHANNEL 2 (31) is controlled by the left

side of the crossfader and CHANNEL 1 (19) is controlled

by the right side of the crossfader.

NOTE: When the CROSSFADER REVERSE SWITCH (11) is activated

(moved to the right), only the crossfader reverses. The Channel

Slides, Gain, Kill Switches and tonal controls do not reverse.

8. CUE: Cue facilitates the seamless blending of one

recorded track into another. Connecting a set of head-

phones to the HEADPHONES (8) jack allows you to moni-

tor either Channel 1 or Channel 2. Select CHANNEL 1

(19) by moving CUE FADER (18), located on the front

panel, to CUE 1 on the left. Listen to Channel 2 by mov-

ing CUE FADER (18) to CUE 2 on the right. To mix both

Channels bring CUE (18) to the middle so that both tracks

may be heard. Use CUE VOLUME (9) to adjust the head-

phone volume without affecting the speaker-driven mix.

9. MIC SECTION: Connecting a microphone to the 1/4"

MIC JACK (10) allows voice amplification through the

mixer to the stereo through the MASTER OUTPUTS (3) .

This is controlled by the MIC VOLUME (16), HIGH (15),

LOW (14) rotary controls.

10. OUTPUT CONTROL SECTION: The level of the

MASTER OUTPUT (3) is controlled by the MASTER

VOLUME (13) rotary control.

11. DISPLAYS: The DUAL LED METER (25) indicates

the MASTER OUTPUT (3) in stereo. DUAL LED METER

(25) reflects the MASTER VOLUME (13), GAIN (24,32),

HIGH (23,33), MID (22,34) and LOW (21,35) rotary con-

trol adjustments for each channel. The CHANNNEL

SLIDES (19, 31) also affect each of the LED METER (25)

LEDs.

SPECIFICATIONS:

INPUTS:

DJ Mic......................................................................1.5 mV 1 kOhm Balanced

Phono.......................................................................................3 mV 47 kOhm

Line.......................................................................................150 mV 10 kOhm

OUTPUTS:

Amp........................................... .........................................0 dB 1V 400 Ohm

Max.....................................................................................20V Peak to Peak

GENERAL:

Bass (Channels 1-2)..................................................................+12dB/-36dB

Mid (Channels 1-2)....................................................................+12dB/-36dB

High (Channels 1-2)..........................................................+12dB/-36dB

Gain (Channels 1-2)........................................................................0 to -20 dB

Frequency Response....................................................20 Hz-20 kHz +/- 2 dB

Distortion...............................................................................Less Than 0.02%

S/N Ratio.............................................................................Better Than 80 dB

Headphone Impedance.......................................................................32 Ohm

Power Source Adapter........................................................115V/15V AC 0.5A

........................................................................................or 230V/15V AC 0.5A

Unit Dimensions........................................................W 10" x H 3.3" x D 10.25"

..........................................................................................(254 x 84 x 260mm)

Weight....................................................................................6.2 lbs ( 2.81 kg)

NOTE: SPECIFICATIONS AND DESIGN ARE SUBJECT TO CHANGE

WITHOUT NOTICE FOR PURPOSE OF IMPROVEMENT.

1. Unscrew the outside mixer

FACE PLATE screws and

remove the face plate. Then

remove FADER plate screws (B

& C).

2. Carefully lift the fader and

unplug the CABLE (D).

3. Plug the new fader into t h e

cable and place it back in the

mixer.

4. Screw fader plate to the mixer

and replace the mixer FACE

PLATE.

USER REPLACEABLE CROSS FADER

(5)

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Gemini IPMX User Manual Page 5

Comments to this Manuals

Related products and manuals for Musical Instruments Gemini IPMX